Any TV or projector
An HDMI cable from your iPhone works with almost any TV, smart board or projector, and doesn’t depend on Wi-Fi or the school network. The whole class sees your FlowBand session results on the big screen.
Before you start: turn on Do Not Disturb
Everything on your iPhone shows on the big screen, including texts and notifications. Swipe down from the top-right corner of your iPhone, tap Focus, then tap Do Not Disturb.
What you'll need
An Apple video adapter for your iPhone. iPhone 15 or newer: the Apple USB-C Digital AV Multiport Adapter. iPhone 14 or older: the Apple Lightning Digital AV Adapter. Cheap no-name adapters often don't work with iPhones.
An HDMI cable, 10 to 15 feet long, so it reaches from the display to where you stand.
Steps
Plug one end of the HDMI cable into an HDMI port on the TV, smart board or projector. On TVs and smart boards they're usually on the back, the side or along the bottom edge.
Plug the other end of the HDMI cable into the adapter. Then plug the adapter into your iPhone's charging port.
On the display's remote or its buttons, press Input (or Source) and choose the HDMI port you used.
Your iPhone screen now appears on the display. Open the Beyond Pulse app and open the session you want to show.
Tip: the adapter also has a charging port. If you plug your iPhone charger in there, your phone stays charged while it's connected.
Still stuck?
Email support@beyondpulse.com or call +1 (503) 922-0211, and we'll walk you through it.
