ViewSonic smart board
These steps put your iPhone screen on your ViewSonic smart board (ViewBoard), so the whole class can see their FlowBand session results together. Try the wireless way first. If it doesn’t work, the cable way always will.
Before you start: turn on Do Not Disturb
Everything on your iPhone shows on the big screen, including texts and notifications. Swipe down from the top-right corner of your iPhone, tap Focus, then tap Do Not Disturb.
Option 1: Wireless (free, try this first)
On the board, go to the home screen and open the app called vCast or ViewBoard Cast. The board will show its name, and maybe a short code.
On your iPhone, swipe down from the top-right corner.
Tap Screen Mirroring. It's the icon with two overlapping rectangles.
Tap the board's name. If it asks for a code, type the code shown on the board.
Your iPhone screen now appears on the board. Open the Beyond Pulse app and open the session you want to show.
When you're done, swipe down again, tap Screen Mirroring, then tap Stop Mirroring.
Don't see the board's name in step 4? The school network is probably blocking it. Don't spend time on it. Use Option 2 instead.
Option 2: With a cable (always works)
This doesn't depend on Wi-Fi or the school network. You'll need:
An Apple video adapter for your iPhone. iPhone 15 or newer: the Apple USB-C Digital AV Multiport Adapter. iPhone 14 or older: the Apple Lightning Digital AV Adapter. Cheap no-name adapters often don't work with iPhones.
An HDMI cable, 10 to 15 feet long, so it reaches from the board to where you stand.
Plug one end of the HDMI cable into an HDMI port on the board. They're usually on the side or along the bottom edge.
Plug the other end of the HDMI cable into the adapter. Then plug the adapter into your iPhone's charging port.
On the board's remote or its front buttons, press Input (or Source) and choose the HDMI port you used.
Your iPhone screen now appears on the board. Open the Beyond Pulse app and open the session you want to show.
Tip: the adapter also has a charging port. If you plug your iPhone charger in there, your phone stays charged while it's connected.
Still stuck?
Email support@beyondpulse.com or call +1 (503) 922-0211, and we'll walk you through it.
